<img alt="" src="https://secure.hiss3lark.com/167206.png" style="display:none;">

Contact Adhesives

polymers_contact_adhesive

Used for bonding laminates or foam, contact adhesives demonstrate auto-adhesion. This means that when two dry films are brought together they will bond and not separate.

MCP offers non-carboxylated styrene-butadiene latex polymers for contact adhesive extenders. These products are blended with polychloroprene or natural latex in order to lower overall cost of the formulation with similar or improved performance.

Product Selection Guides

EXPLORE OUR

Products

NON-CARBOXYLATED STYRENE-BUTADIENE EMULSION

  • Polymer
  • Solids (%)
  • Viscosity (cps)
  • Tg (°C)
  • Rovene® 4848
  • 49.5-51.5
  • 800 Max
  • -38
  • Rovene 4848 is a very soft, non-carboxylated styrene-butadiene emulsion specifically designed for the use in a two part spray adhesive for open or closed cell foams and other contact and cold seal applications.

  • Rovene® 4220
  • 52-54
  • 200-800
  • -26
  • Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives.

VINYL-ACETATE ETHYLENE EMULSION

  • Polymer
  • Solids (%)
  • Viscosity (cps)
  • Tg (°C)
  • Rovene® 7008
  • 55
  • 1500-2500
  • +20
  • Rovene 7008 forms a tough but still flexible film with the best adhesive properties for broad applications. The Rovene 7008 exhibits excellent mechanical stability, and shows good wet tack and fast setting speed, so it can be ideally applied by a variety of techniques, including roller blade, spray gun, or extrusion. It shows good resistance against aging, light or alkali.

Products

Didn’t find what you were looking for?

Let’s find the right water based emulsions to balance quality, performance & cost