Latex emulsion polymers are used as the binder in digital inks and for an ink receptive coating. The purpose of the ink receptive coating is to be able to readily accept the digital ink to prevent bleeding and maintain a sharp image. In addition to good binding and adhesion, digital printing requires precise control of rheology along with fast drying.
Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes.
Rovene 6103 is a styrene-acrylic resin supported emulsion can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes.
Rovene 6112 is a hard, film forming, low glycol and VOC vehicle with a moderately low glass transition temperature for flexographic and gravure inks and overprint varnishes.
Rovene 6106 is a low viscosity but high solids letdown emulsion for paper and paper board substrates.
Rovene® 6106V is a high viscosity, high solids letdown emulsion for paper and paper board substrates.
Rovene 6111 is a low glycol and low VOC styrene-acrylic resin supported emulsion. It is a general purpose, hard, non-film forming emulsion for flexographic and gravure inks and overprint varnishes.
Rovene 6115 is a styrene-acrylic resin supported emulsion. Rovene 6115 is hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard substrates.
Rovene 6107 is a very hard, resin supported emulsion but has a minimum film forming temperature below 20°C that is designed to be used as a letdown vehicle in inks and overprint varnishes for paper and paperboard substrates.
Rovene 4100 is a styrene-butadiene emulsion polymer recommended for use for boxboard coating, in some publication grade papers and in the adhesive industry.
Rovene 5499 is a film forming styrene-butadiene emulsion that was developed as an ink vehicle for thermoplastic polyolefin (TPO) based wall coverings. More specifically it can be formulated for metallic ink vehicles.
Rovene 4111 is a high glass transition temperature styrene-butadiene emulsion designed to provide additional opacity in inks, specifically inks formulated with titanium dioxide.
.svg){kind=small}
Construction
Nonwovens
Adhesives
Textiles
Printing & Packaging
Paper
Paints & Coatings
