Metal coatings can be used for architectural as well as for industrial coatings. Typically, metal coatings are used in one layer or as multi-layer system. Direct to metal (DTM) systems provide anti corrosion protection and excellent adhesion on metal substrates. As topcoat metal coatings provide chemical resistance and mechanical protection such as scratch or impact resistance.
Ecronova RA 576 H is a self-crosslinking pure acrylic emulsion that incorporates excellent block and alkaline resistance and extraordinary wet adhesion with minimal water absorption.
Due to its high UV stability, Ecronova RA 127 is recommended for exterior paints and plasters with low dirt pick-up.
Ecronova RA 646 H is a self-crosslinking acrylic emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance as well as good wetting of wooden substrates especially for furniture and industrial coatings.
Ecronova® RA 644 H is an ambient cure, OH-functional emulsion that provides good chemical and blocking resistance, high hardness and scratch resistance.
Ecronova® KS 447 is a styrene-acrylic emulsion that shows excellent adhesion on various metal substrates and very good corrosion protection results can be obtained.
